=> Bootstrap dependency digest>=20010302: found digest-20121220 => Checksum SHA1 OK for clamav-0.98.7.tar.gz => Checksum RMD160 OK for clamav-0.98.7.tar.gz ===> Installing dependencies for clamav-0.98.7nb2 ========================================================================== The supported build options for clamav are: clamav-experimental milter unit-test You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.clamav (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, clamav-0.98.7nb2. Their current value is shown below: * BDB185_DEFAULT = db1 * BDB_DEFAULT = db4 * CLAMAV_DBDIR = /usr/pkg/var/clamav * CLAMAV_GROUP = clamav * CLAMAV_USER = clamav * KRB5_DEFAULT = heimdal * SSLBASE = /usr * SSLCERTS = /etc/openssl/certs * SSLDIR = /etc/openssl * SSLKEYS = /etc/openssl/private Based on these variables, the following variables have been set: * BDBBASE = /usr * BDB_LIBS (defined, but empty) * BDB_TYPE = db1 * KRB5BASE (defined, but empty) * KRB5_TYPE = heimdal You may want to abort the process now with CTRL-C and change their value before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after the changes. ========================================================================== => Tool dependency libtool-base>=2.2.6bnb3: found libtool-base-2.4.2nb10 => Full dependency libltdl>=2.4.2: found libltdl-2.4.2 => Full dependency gmp>=5.0.1: found gmp-6.0.0a => Full dependency libxml2>=2.8.0nb2: found libxml2-2.9.2nb3 => Full dependency curl>=7.35.0nb1: found curl-7.44.0 => Full dependency pth>=2.0.0nb2: found pth-2.0.7nb4 ===> Overriding tools for clamav-0.98.7nb2 ===> Extracting for clamav-0.98.7nb2 ===> Patching for clamav-0.98.7nb2 => Applying pkgsrc patches for clamav-0.98.7nb2 ===> Creating toolchain wrappers for clamav-0.98.7nb2 ===> Configuring for clamav-0.98.7nb2 => Substituting "vars" in etc/clamd.conf.sample => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version checking build system type... i386-elf32-minix checking host system type... i386-elf32-minix checking target system type... i386-elf32-minix creating target.h - canonical system defines checking for a BSD-compatible install... /usr/bin/install -c -o root -g operator checking whether build environment is sane... yes checking for a thread-safe mkdir -p... config/install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... plaintar checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for i386-elf32-minix-gcc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... yes checking minix/config.h presence... yes checking for minix/config.h... yes checking whether it is safe to define __EXTENSIONS__... yes checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert i386-elf32-minix file names to i386-elf32-minix format... func_convert_file_noop checking how to convert i386-elf32-minix file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for i386-elf32-minix-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... unknown checking for i386-elf32-minix-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for i386-elf32-minix-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for i386-elf32-minix-strip... no checking for strip... strip checking for i386-elf32-minix-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for i386-elf32-minix-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... yes checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... rm: conftest*: No such file or directory yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... rm: conftest*: No such file or directory no checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking which extension is used for runtime loadable modules... .so checking which variable specifies run-time module search path... checking for the default library search path... /lib /usr/lib checking for library containing dlopen... none required checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... unknown checking for argz.h... no checking for error_t... no checking for argz_add... no checking for argz_append... no checking for argz_count... no checking for argz_create_sep... no checking for argz_insert... no checking for argz_next... no checking for argz_stringify... no checking whether libtool supports -dlopen/-dlpreopen... yes checking for ltdl.h... yes checking whether lt_dlinterface_register is declared... yes checking for lt_dladvise_preload in -lltdl... yes checking where to find libltdl headers... -I/usr/pkg/include checking where to find libltdl library... -L/usr/pkg/lib -lltdl checking for unistd.h... (cached) yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for mach-o/dyld.h... no checking for dirent.h... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes checking for strlcat... yes checking for strlcpy... yes checking for i386-elf32-minix-gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for cos in -lm... yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking sys/int_types.h usability... no checking sys/int_types.h presence... no checking for sys/int_types.h... no checking for dlfcn.h... (cached) yes checking for inttypes.h... (cached) yes checking sys/inttypes.h usability... yes checking sys/inttypes.h presence... yes checking for sys/inttypes.h... yes checking sys/times.h usability... yes checking sys/times.h presence... yes checking for sys/times.h... yes checking for memory.h... (cached) yes checking ndir.h usability... no checking ndir.h presence... no checking for ndir.h... no checking for stdlib.h... (cached) yes checking for strings.h... (cached) yes checking for string.h... (cached) yes checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for sys/stat.h... (cached) yes checking for sys/types.h... (cached) yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking sys/filio.h usability... yes checking sys/filio.h presence... yes checking for sys/filio.h... yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking stdbool.h usability... yes checking stdbool.h presence... yes checking for stdbool.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for C/C++ restrict keyword... __restrict checking for an ANSI C-conforming const... yes checking for inline... inline checking whether byte ordering is bigendian... no checking for a supported version of gcc... ok (4.2.1) checking for gcc bug PR27603... ok, bug not present checking for gcc bug PR26763-2... ok, bug not present checking for valid code generation of CLI_ISCONTAINED... ok, bug not present checking for gcc bug PR28045... ok, bug not present checking for gcc bug PR37573... ok, bug not present checking for off_t... yes checking size of short... 2 checking size of int... 4 checking size of long... 4 checking size of long long... 8 checking size of void *... 4 checking for ld --version-script... yes checking whether uname(2) is POSIX... yes checking for bind in -lsocket... no checking for library containing gethostent... none required checking for poll... yes checking for setsid... yes checking for memcpy... yes checking for snprintf... yes checking for vsnprintf... yes checking for strerror_r... yes checking for strlcpy... (cached) yes checking for strlcat... (cached) yes checking for strcasestr... yes checking for inet_ntop... yes checking for setgroups... yes checking for initgroups... yes checking for ctime_r... yes checking for mkstemp... yes checking for mallinfo... no checking for madvise... no checking for getnameinfo... yes checking for _LARGEFILE_SOURCE value needed for large files... no checking for working mmap... yes checking for sysconf(_SC_PAGESIZE)... yes checking for getpagesize()... yes checking for MAP_ANON(YMOUS)... MAP_ANONYMOUS checking for enable_extended_FILE_stdio... no checking for timegm... yes checking for sysctlbyname... yes checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking check.h usability... no checking check.h presence... no checking for check.h... no configure: unable to compile/link with check checking for libxml2 installation... using /usr/pkg checking xml2-config version... 2.9.2 checking for xmlreader.h in /usr/pkg... found checking for xmlTextReaderRead in -lxml2... yes configure: Compiling and linking with libxml2 from /usr/pkg checking for OpenSSL installation... checking for SSL_library_init in -lssl... yes checking for EVP_EncryptInit in -lcrypto... yes checking for X509_VERIFY_PARAM_new in -lssl... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for zlib installation... using /usr checking for inflateEnd in -lz... yes checking for gzopen in -lz... yes checking how to link with libbz2... /usr/lib/libbz2.so checking for BZ2_bzDecompressInit in -lbz2... yes checking bzlib.h usability... yes checking bzlib.h presence... yes checking for bzlib.h... yes checking for CVE-2008-1372... ok checking for CVE-2010-0405... ok checking for getaddrinfo... yes checking for IPv6 support... no checking for resolv.h... yes checking for dn_expand in std libs... yes checking whether setpgrp takes no argument... no checking for libiconv_open in -liconv... no checking for iconv... yes checking for pthread.h... (cached) yes checking whether in_port_t is defined... yes checking for in_addr_t definition... yes checking for sched_yield... no checking for pthread_yield... no checking for readdir_r... yes, and it takes 3 arguments checking for ctime_r... yes, and it takes 2 arguments checking for socklen_t... yes checking for structure packing via __attribute__((packed))... yes checking for type aligning via __attribute__((aligned))... yes checking that structure packing works... yes checking for fd_set... yes, found in sys/select.h checking default FD_SETSIZE value... 255 checking stat64... no checking whether signed right shift is sign extended... yes checking for recvmsg... yes checking for sendmsg... yes checking for msg_control field in struct msghdr... yes checking BSD 4.4 / RFC2292 style fd passing... yes checking ncurses/ncurses.h usability... yes checking ncurses/ncurses.h presence... yes checking for ncurses/ncurses.h... yes checking linking with ncurses... ok configure: Compiling and linking with ncurses by using -lncurses checking for libcurl installation... checking for curl_easy_init in -lcurl... yes configure: creating ./config.status config.status: creating libltdl/Makefile config.status: creating clamscan/Makefile config.status: creating database/Makefile config.status: creating docs/Makefile config.status: creating clamd/Makefile config.status: creating clamdscan/Makefile config.status: creating clamsubmit/Makefile config.status: creating clamav-milter/Makefile config.status: creating freshclam/Makefile config.status: creating sigtool/Makefile config.status: creating clamconf/Makefile config.status: creating etc/Makefile config.status: creating test/Makefile config.status: creating unit_tests/Makefile config.status: creating clamdtop/Makefile config.status: creating clambc/Makefile config.status: creating Makefile config.status: creating clamav-config config.status: creating libclamav.pc config.status: creating platform.h config.status: creating docs/man/clamav-milter.8 config.status: creating docs/man/clamav-milter.conf.5 config.status: creating docs/man/clambc.1 config.status: creating docs/man/clamconf.1 config.status: creating docs/man/clamd.8 config.status: creating docs/man/clamd.conf.5 config.status: creating docs/man/clamdscan.1 config.status: creating docs/man/clamscan.1 config.status: creating docs/man/freshclam.1 config.status: creating docs/man/freshclam.conf.5 config.status: creating docs/man/sigtool.1 config.status: creating docs/man/clamdtop.1 config.status: creating docs/man/clamsubmit.1 config.status: creating clamav-config.h config.status: executing depfiles commands config.status: executing libtool commands rm: libtoolT: No such file or directory === configuring in libclamav/c++ (/usr/pkgsrc/work/security/clamav/work/clamav-0.98.7/libclamav/c++) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/pkg' '--disable-clamav' '--sysconfdir=/usr/pkg/etc' '--with-dbdir=/usr/pkg/var/clamav' '--with-group=clamav' '--with-user=clamav' '--with-libcurl=/usr/pkg' '--with-ltdl-include=/usr/pkg/include' '--with-ltdl-lib=/usr/pkg/lib' '--with-openssl=/usr' '--with-xml=/usr/pkg' '--with-zlib=/usr' '--disable-zlib-vcheck' '--enable-readdir_r' '--disable-milter' '--libdir=/usr/pkg/lib' '--build=i386-elf32-minix' '--host=i386-elf32-minix' '--mandir=/usr/pkg/man' 'build_alias=i386-elf32-minix' 'host_alias=i386-elf32-minix' 'CC=cc' 'CFLAGS=-O2 -march=i586 -I/usr/include -I/usr/pkg/include -I/usr/pkg/include/krb5' 'LDFLAGS=-L/usr/lib -Wl,-R/usr/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib' 'LIBS=' 'CPPFLAGS=-I/usr/include -I/usr/pkg/include -I/usr/pkg/include/krb5' --cache-file=/dev/null --srcdir=. checking build system type... i386-elf32-minix checking host system type... i386-elf32-minix checking target system type... i386-elf32-minix checking for a BSD-compatible install... /usr/bin/install -c -o root -g operator checking whether build environment is sane... yes checking for a thread-safe mkdir -p... config/install-sh -c -d checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking how to create a pax tar archive... none checking whether make supports nested variables... yes checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of c++... gcc3 checking for i386-elf32-minix-gcc... cc checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking dependency style of cc... gcc3 checking how to run the C preprocessor... cc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/egrep checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking whether to enable maintainer-specific portions of Makefiles... no checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 262144 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... no checking how to convert i386-elf32-minix file names to i386-elf32-minix format... func_convert_file_noop checking how to convert i386-elf32-minix file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for i386-elf32-minix-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... unknown checking for i386-elf32-minix-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for i386-elf32-minix-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for i386-elf32-minix-strip... no checking for strip... strip checking for i386-elf32-minix-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for i386-elf32-minix-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... yes checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... rm: conftest*: No such file or directory yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... rm: conftest*: No such file or directory no checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... no checking whether to build shared libraries... no checking whether to build static libraries... yes checking how to run the C++ preprocessor... c++ -E checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... no checking for c++ option to produce PIC... -fPIC -DPIC checking if c++ PIC flag -fPIC -DPIC works... yes checking if c++ static flag -static works... yes checking if c++ supports -c -o file.o... rm: conftest*: No such file or directory yes checking if c++ supports -c -o file.o... (cached) yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... no checking dynamic linker characteristics... no checking how to hardcode library paths into programs... immediate checking for GNU make... "Not found" checking for supported LLVM version... ok (2.8) checking for supported C++ compiler version... ok (4.2.1) checking for supported OS... configure: error: OS minix is not supported, not building LLVM configure: creating ./config.status config.status: creating libltdl/Makefile config.status: creating clamscan/Makefile config.status: creating database/Makefile config.status: creating docs/Makefile config.status: creating clamd/Makefile config.status: creating clamdscan/Makefile config.status: creating clamsubmit/Makefile config.status: creating clamav-milter/Makefile config.status: creating freshclam/Makefile config.status: creating sigtool/Makefile config.status: creating clamconf/Makefile config.status: creating etc/Makefile config.status: creating test/Makefile config.status: creating unit_tests/Makefile config.status: creating clamdtop/Makefile config.status: creating clambc/Makefile config.status: creating Makefile config.status: creating clamav-config config.status: creating libclamav.pc config.status: creating platform.h config.status: creating docs/man/clamav-milter.8 config.status: creating docs/man/clamav-milter.conf.5 config.status: creating docs/man/clambc.1 config.status: creating docs/man/clamconf.1 config.status: creating docs/man/clamd.8 config.status: creating docs/man/clamd.conf.5 config.status: creating docs/man/clamdscan.1 config.status: creating docs/man/clamscan.1 config.status: creating docs/man/freshclam.1 config.status: creating docs/man/freshclam.conf.5 config.status: creating docs/man/sigtool.1 config.status: creating docs/man/clamdtop.1 config.status: creating docs/man/clamsubmit.1 config.status: creating libclamav/Makefile config.status: creating clamav-config.h config.status: clamav-config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands rm: libtoolT: No such file or directory configure: Summary of detected features follows OS : minix pthreads : yes () configure: Summary of miscellaneous features check : no (auto) fanotify : yes fdpassing : 1 IPv6 : no configure: Summary of optional tools clamdtop : -lncurses (auto) milter : yes (disabled) clamsubmit : yes configure: Summary of engine performance features release mode: yes llvm : no, from MIA (auto) mempool : yes configure: Summary of engine detection features bzip2 : ok zlib : /usr unrar : yes pcre : no libxml2 : yes, from /usr/pkg configure: WARNING: ****** WARNING: ****** You are cross compiling to a different host or you are ****** linking to bugged system libraries or you have manually ****** disabled important configure checks. ****** Please be aware that this build may be badly broken. ****** DO NOT REPORT BUGS BASED ON THIS BUILD !!! => Modifying libtool scripts to use pkgsrc libtool